Print Back

Drive Pins with a 8mm diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.157" diameter shank in various lengths. Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.

0188-8mm-head-collated-spiral-csi-drive-pin
Unit of Measure
1 

Part #

Units Per Package

Shank Length

Head Diameter

Shank Diameter

List Price

I3350450 N/A 100 N/A 5/8" (16mm) Knurled N/A 8mm N/A .157 $8.47
I3350452 N/A 100 N/A 3/4" (19mm) Knurled N/A 8mm N/A .157 $8.54
I3350454 N/A 100 N/A 7/8" (22mm) Knurled N/A 8mm N/A .157 $8.89
I3350456 N/A 100 N/A 1" (27mm) Knurled N/A 8mm N/A .157 $9.31
I3350458 N/A 100 N/A 1-1/4" (32mm) Knurled N/A 8mm N/A .157 $10.15
I3350460 N/A 100 N/A 1-1/2" (37mm) Knurled N/A 8mm N/A .157 $10.43
I3350461 N/A 100 N/A 1-5/8" (42mm) Knurled N/A 8mm N/A .157 $11.06
I3350462 N/A 100 N/A 2" (52mm) Knurled N/A 8mm N/A .157 $11.76
I3350464 N/A 100 N/A 2-7/8" (72mm) Knurled N/A 8mm N/A .157 $13.65
Unit of Measure
1