Print Back

Drive Pins with a 8mm diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.145" diameter shank in various lengths. Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.

0184-8mm-head-drive-pin
Unit of Measure
1 

Part #

Units Per Package

Shank Length

Head Diameter

Shank Diameter

List Price

I3350180 N/A 100 N/A 16mm Knurled (5/8") N/A 8mm N/A .145 $15.61
I3350182 N/A 100 N/A 19mm Knurled (3/4") N/A 8mm N/A .145 $16.17
I3350184 N/A 100 N/A 22mm (7/8") N/A 8mm N/A .145 $17.92
I3350186 N/A 100 N/A 27mm (1") N/A 8mm N/A .145 $18.62
I3350188 N/A 100 N/A 32mm(1-1/4") N/A 8mm N/A .145 $19.53
I3350190 N/A 100 N/A 37mm (1-1/2") N/A 8mm N/A .145 $23.73
I3350192 N/A 100 N/A 42mm (1-5/8") N/A 8mm N/A .145 $24.22
I3350194 N/A 100 N/A 47mm (1-7/8) N/A 8mm N/A .145 $24.78
I3350196 N/A 100 N/A 52mm (2") N/A 8mm N/A .145 $25.55
I3350198 N/A 100 N/A 57mm (2-1/4") N/A 8mm N/A .145 $26.46
I3350200 N/A 100 N/A 62mm (2-1/2") N/A 8mm N/A .145 $27.44
I3350202 N/A 100 N/A 72mm (2-7/8") N/A 8mm N/A .145 $28.77
Unit of Measure
1