Print Back

Drive Pins with a 8mm diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.157" diameter shank in various lengths. Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.

0187-8mm-head-spiral-csi-drive-pin
Unit of Measure
1 

Part #

Units Per Package

Shank Length

Head Diameter

Shank Diameter

List Price

I3350201 N/A 100 N/A 5/8" (16mm) N/A 8mm N/A .157 $12.88
I3350203 N/A 100 N/A 3/4" (19mm) N/A 8mm N/A .157 $12.95
I3350204 N/A 100 N/A 7/8" (22mm) N/A 8mm N/A .157 $14.42
I3350205 N/A 100 N/A 1" (27mm) N/A 8mm N/A .157 $14.42
I3350208 N/A 100 N/A 1-1/4" (32mm) N/A 8mm N/A .157 $15.40
I3350207 N/A 100 N/A 1-1/2" (37mm) N/A 8mm N/A .157 $16.24
I3350209 N/A 100 N/A 2" (52mm) N/A 8mm N/A .157 $19.46
I3350211 N/A 100 N/A 2-7/8" (72mm) N/A 8mm N/A .157 $23.59
Unit of Measure
1