P1000
Hammer actuated , powder actuated tool. Engineered for high reliability, low maintenance and speed. This tool uses four levels of power; grey through yellow loads (levels 1/4) and .300, 8mm head fasteners with lengths of 1/2" through 3" and 1/4-20" thread studs.
Power Levels: Gray (1), Brown (2), Green (3), Yellow (4).
Pin Type: Ballistic Point Drive Pin, .300 Head Drive Pin, 8mm Head Drive Pin, 1/4"-20 Threaded Stud
/Asset/0210-p1000.jpgT1000
The T1000 is a professional grade powder actuated tool engineered for high reliability, low maintenace and speed. Its easy to use trigger mechanism makes fastening to concrete, block and steel simple. The tool use 22 caliber powder loads.
Power Levels: Gray (1), Brown (2), Green (3), Yellow (4).
Pin Type: Ballistic Point Drive Pin, .300 Head Drive Pin, 8mm Head Drive Pin, 1/4"-20 Threaded Stud
/Asset/0211-t1000.jpgP2201
(4)The P2201 is designed for maintenance or residential contractors.
Tool Body: Engineered Plastic
Pin Length: 1/2" to 3" Total Length
Tool Length: 12-1/2"
Load Type: .22 Caliber Crimped "A" Load
Power Levels: Gray (1), Brown (2), Green (3), Yellow (4).
Pin Type: Ballistic Point Drive Pin, .300 Head Drive Pin, 8mm Head Drive Pin, 1/4"-20 Threaded Stud
P35S
(7)The P35S is specially designed for acoustical and drywall contractors. The P35 is designed for high speed and repetitive volume applications. The standard version of the tool is supplied with a flat end piston and a full size baseplate/guide. A limited access baseplate/guide assembly is also available.
Tool Body: Precision Cast Aluminum
Pin Length: 1/2" to 1-1/2" Total Length
Tool Length: 11-1/4"
Load Type: .25 Caliber in a 10 Load Strip
Power Levels: Green (3), Yellow (4), Red (5).
Pin Type: Ballistic Point Drive Pin, .300 Head Drive Pin, 8mm Head Drive Pin, 1/4"-20 Threaded Stud
P7201
(5)The P7201 is commonly used in the drywall trade.
Tool Body: Precision Cast Aluminum
Pin Length: 1/2" to 1-1/2" Total Length
Tool Length: 13-1/2"
Load Type: .22 Caliber Crimped "A" Load
Power Levels: Gray (1), Brown (2), Green (3), Yellow (4)
Pin Type: Ballistic Point Drive Pin, .300 Head Drive Pin, 8mm Head Drive Pin, 1/4"-20 Threaded Stud
P3500
(14)The P3500 is a low velocity, semi-automatic .27 caliber tool which can be used to install .300 head drive pins and 1/4"-20 threaded studs, up to 3" in total length. The P3500 is designed for high speed and repetitive volume applications.
Tool Body: Precision Cast Aluminum
Pin Length: 1/2" to 3" Total Length
Tool Length: 13-5/8"
Load Type: .27 Caliber / 10 Load Strip
Power Levels: Brown (2), Green (3), Yellow (4), Red (5)
Pin Type: Ballistic Point Drive Pin, .300 Head Drive Pin, 8mm Head Drive Pin, 1/4"-20 Threaded Stud
PA3500
(12)The PA3500 is a modified version of the P3500 that includes a power adjuster, allowing the operator to effectively decrease the power level of the load being used. A red load can be reduced down to the level of a green load.
Tool Body: Precision Cast Aluminum
Pin Length: 1/2" to 3" Total Length
Tool Length: 13-5/8"
Load Type: .27 Caliber / 10 Load Strip
Power Levels: Brown (2), Green (3), Yellow (4), Red (5)
Pin Type: Ballistic Point Drive Pin, .300 Head Drive Pin, 8mm Head Drive Pin, 1/4"-20 Threaded Stud
Power Adjuster Settings: Minimum Power (1), Medium Power (3), Maximum Power (6)
P3801
(7)Powerful heavy-duty powder actuated tool, for installing 3/8" threaded studs into concrete and steel. This tool features an easy load ejector and has a low re-coil for greater operator comfort. The P3801 is independent of any external power source saving you time and money.
Tool Body: Precision Cast Aluminum
Pin Length: 1/2" to 3" Total Length
Tool Length: 14"
Load Type: .27 Caliber Short and Long
Power Levels: Red (5), Purple (6)
Pin Type: 1/4" to 3/8" Threaded Stud and 3/8" Headed Drive Pins
P3600
(4)The P3600 is designed for applications where more power is needed, such as attaching 2x4's to hard aggregate or steel. The tool utilizes a red or purple .27 caliber strip.
Tool Body: Precision Cast Aluminum
Pin Length: 1/2" to 3" Total Length
Tool Length: 13-5/8"
Load Type: .27 Caliber in a 10 Load Strip
Power Levels: Red (5), Purple (6)
Pin Type: 10mm head Pins, 3/8" Threaded Studs and 3/8" Headed Drive Pins
PA351
(5)This lightweight, fully automatic tool fastens up to 700 nails per hour for increased productivity. Easy drop in magazine for one handed operation. A power adjuster proves variable power choices and drives a wide variety of fasteners.
Tool Body: Engineered Plastic
Pin Length: 5/8" to 1-5/8" Total Length
Tool Length: 17
Load Type: .27 Caliber in a 10 Load Strip
Power Levels: Brown (2), Green (3), Yellow (4), Red (5)
Pin Type: 10 fastener magazine. Can be converted to single shot tool
Power Adjuster Settings: Minimum Power (1), Medium Power (3), Maximum Power (6)
P60
Shoots a 2-3/8" pin, 2-1/2" pin with washer or threaded stud 1/4"-20 up to 1".
Tool Body: Engineered Plastic
Pin Length: 2-3/8" Total Length
Tool Length: 12-1/4"
Load Type: .25 Caliber in a 10 Load Disk
Power Levels: Brown (2), Green (3), Yellow (4)
Pin Type: Single Shot
Sniper Pole Tool
(3)Ideally suited to installing overhead ceiling clips with a 1-1/2" pin. Features Safety Sequence Strip Loading, allowing load advancements only after the pin has been installed in those nose piece, and the handle must be clicked to advance the next load.
Tool Body: Precision Cast Aluminum
Pin Length: 1-1/2" Total Length
Tool Length: 17"
Load Type: .25 Caliber in a 10 Load Strip
Power Levels: Brown (2), Green (3), Yellow (4), Red (5)
Pin Type: .300 Head Drive Pin, 8mm Head Drive Pin, Ballistic Point Drive Pin